Arizer Solo 2

Arizer Solo II – Vitals
Manufacturer	Arizer
Style	Portable
Charging Time	~ 3 Hours
Warranty	2 Years
MSRP	$249.99

Brief Overview

The Arizer Solo 2 Vaporizer is the successor to the tried and tested original Solo Vaporizer. The Arizer Solo Vaporizer was a massive success when it was first released and is still the Vaporizer of choice for many people today – which just goes to show that it is truly a timeless classic. Arizer have taken everything that we loved about the Solo Vape and improved and made significantly better with the successor, the Solo 2. Also included in the Solo 2 Vape are some new and exciting features that we’ve never seen from Arizer. The Solo 2 Vape pays massive tribute to the original Solo with a similar design and style, however it is significantly smaller and more compact.

Charging

+–Q: How long will a full battery charge last?

A: A full charge will allow up to 3 hours of vaporization.

+–Q: How long does it take to charge?

A: It will take about 3 hours to fully charge or longer if you use it while charging.

+–Q: Can I charge it in a 240V outlet?

A: The Solo II works on 110-240V, so anywhere in the world.

+–Q: Can the Solo II be used while charging?

A: Yes, it can.

+–Q: How do I know when the Solo II needs to be charged?

A: The battery icon will flash and the unit will not heat.

Temperature

+–Q: What is the temperature range of the Solo II?

A: Temperature ranges from 122 – 428°F.

+–Q: Do I have to set the temperature each time I turn it on?

A: No you do not, the Solo II will remember your last set temperature.

+–Q: Can the temperature be changed to display in Celsius?

A: Yes, it can.

Usage

+–Q: How do I use the Solo II?

A: First ensure your Arizer Solo II is fully charged. To do that, charge via the charger provided into a power outlet. The charging port can be located on the back of the device. The Solo II takes 3 hours to fully charge, or longer if you use it while charging. Put some coarsely ground material in a small container then gently push and slightly twist the glass stem into the container to fill the dish. Do not press too hard or pack tightly. Pre-heat the unit before inserting any tight tubes. You can carry pre-loaded Glass Aroma Tubes in your Solo II carrying case for quick and easy vaping on the go!

Press and hold the (up arrow) and (M) buttons to turn the unit on. A timer will count down on the OLED screen showing the power-on delay and a greeting message is displayed when the unit is powered on.

Press one of the three control panel buttons and the Solo II will start to heat up to the previously used temperature.

Press the “up arrow” and “down arrow” buttons to adjust the temperature in 1-degree increments, or hold the button down to adjust the temperature in 10-degree increments.

Inhale vapor through the Glass Aroma Tube in a slow steady draw. Try using different inhaling techniques with different temperatures to suit your personal needs / preferences.

+–Q: How long does a full chamber last?

A: A full chamber will last around 20 uses per charge.

+–Q: Can the Solo II be used with concentrates?

A: No, It can’t.

+–Q: How should I prepare my material?

A: A medium to fine grind, loosely loaded. You do not want to overfill the Glass Aroma Tube.

Accessory

+–Q: What parts are replaceable?

A: Glass Aroma Tube.

Common Product Issues

+–Q: Is there an automatic shutoff?

A: Yes, The shut-off timer can be adjusted between 5-15 minutes in one-minute increments. The default setting is 10 minutes.

Cleaning & Maintenance

+–Q: How do I care for the Solo II?

A: After numerous uses the glass parts should be cleaned to ensure optimal performance. To clean the glass parts, soak them in isopropyl (rubbing) alcohol for a couple hours then rinse with hot water.

In most cases doing this will clean the Glass Aroma Tubes as good as new, but if not simply repeat as necessary. After cleaning, always ensure the Glass Aroma Tubes are fully dry before use.

+–Q: What will I need to clean most?

A: The Glass Aroma Tube will need to be cleaned most often as it can get dirty after extended use.

Ordering / Returns / Warranty

+–Q: What is the warranty on the Solo II?

A: The Solo II carries a lifetime warranty on the heating element, a limited 2-year warranty covering defects in materials and workmanship, and a limited 1-year warranty covering the battery. Glass is not covered under warranty.

Product Weight	0.01633184 lb
Charging Options	AC/DC Adapter
Power Source	110-240V Power Adapter
Battery Type	Li-Ion Battery
Recharge Time	~ 3 Hours
Replaceable Battery	No
Warm-Up Time	~ 30 seconds
Heating Element	Stainless Steel
Vapor Path	Glass
Vapor Delivery Method	Direct Draw
Warranty	2 Years

Included with Purchase:

Arizer Solo II
2x Mouthpeices
Aroma Dish
Stirring Tool
Lavender
Travel Pouch

Arizer Solo II

The Arizer Solo II has an excellent finish available in Black & Mystic Blue.

Getting the Most Out of Your Arizer Solo II

The Solo II’s optimized heating system warms up fast and has a wide temperature range of 50° C – 220°C (122°F – 428°F). The temperature is adjustable in 1° increments and 10° increments.
The Audio / Beep function has three volume settings and can be turned on and off. If the Audio / Beep is deactivated, the Solo II remains silent when powered on or off.
If the battery is running low with the Solo II you don’t have to wait for the battery to fully charge before you can use it. Just partially charge the battery (5-10 minutes) and then you can set the temperature and use the Solo II while the battery continues charging. The Solo II will not operate if the battery is completely drained.
To conserve battery life, use the Solo II in a temperature-controlled environment and use lower-temperature settings. When outdoors, stay sheltered from the elements and avoid using in extremely cold temperatures.
The automatic shut-off timer safety feature ensures you don’t forget to turn off the unit and helps conserve battery life. The shut-off timer can be adjusted between 5-15 minutes in one-minute increments. The default setting is 10 minutes.
The Solo II display can be set to Celsius or Fahrenheit. The default setting is Celsius.
The Solo II display has three brightness settings: low, medium, and high. The default setting is medium.

Need Assistance with your Arizer Solo II?

Try these Solutions to common issues:

+–Q: Why won’t my Solo II turn on?

A: First assure that your device is fully charged. If it is and still does not turn on, contact customer service.

+–Q: How can I get better vapor?

A: Make sure your material is a medium to fine grind, and loosely loaded.

Warranty Contact

Arizer Solo II Warranty

Lifetime warranty on the heating element, a limited 2-year warranty covering defects in materials and workmanship, and a limited 1-year warranty covering the battery. Glass is not covered under warranty.

The post Arizer Solo 2 appeared first on VapeWorld Support.